Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Cables

$39.99
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm

$11.99 - $13.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.

$20.49 - $22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

$34.99
The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement.
- Pro Slick Polished inner cables reduce friction and have no coating to wear off
- Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance
- Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included
- Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing
- Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits
- Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

$12.99 - $17.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification

$34.99
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install.
- Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance
- All parts needed for a complete brake cable and housing install on road bikes are included
- Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

$34.99 - $71.99
Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance
- Linear strand construction for compressionless performance
- Appropriate for Teflon coated cables as well as steel and galvanized
- 4.0mm outer diameter solid colors; 4.5mm OD braided colors
- Length: 10m

$5.49 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$5.49 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$13.99 - $15.00
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

$25.00
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs

$42.50
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs

$25.00
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs

$28.00
- Precision-machined cable ferrules for improved braking and shifting performance. - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 50-count bottle

$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

$5.99
- Vision Aero/reverse brake lever specific brake cable
- Replacement cables that only work with Vision reverse brake levers
- Sold individually

$130.00
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product

$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$27.00
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)

$89.90 - $99.90
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

$22.00
- Complete ferrule and cable end kit
- Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4)
- Material: Aluminum

$21.00
SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.

$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

$19.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

$46.00
Replacement line kit for SRAM and Avid hydraulic disc brakes.
- For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1)
- 2000mm, black

$176.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 5 threaded hosebarbs, 5 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers

$40.00
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.

$75.00
Includes:
- 1.1mm elite cables (2 x 2300mm)
- 4mm reinforced linear strand housing
- Ferrules, end caps, frame protectors

$43.00
Includes
- 1.5mm coated cables (1 x 850mm, 1 x 1750mm)
- 5mm Kevlar-reinforced compression-free housing
- Ferrules, end caps, frame protectors

$15.00
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable

$14.00 - $15.00
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Diameter: 1.6mm
- Double Ended: No

$6.00 - $7.00
- Left and right shifter compatible
- Road and MTB compatible
- 1.1mm polished stainless steel cable

$10.95
Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision.
- Cable Tension Barrel Adjusters
- STI compatible
- Adjust the cable tension for optimal STI shifting

$12.95
• Break-Away Quick Disconnect
• Time saving system for managing brake cables on Break-Away bikes
• Light threaded alloy barrels with rubber noise dampener
• Available for both derailleur and brake cables
• Brake Quick Disconnect sold individually
• Derailleur Quick Disconnect sold in pairs

$13.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.

$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible

$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable.
- Length: 60 – 65mm
- Black

$3.50 - $3.99
The Slic-Kable features a low friction inner wire for smooth braking.
- 65-inch length
Page 1 of 3
Next page