Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Handlebar Grips/Tape

All-City Track Grips
$10.00
• Classic track grips • 175mm length
All-City Handlebar Tape
$30.00
Thick, cushioned silicone tape provides durable all-weather grip and confidence. Includes locking handlebar plugs.
Brooks Plump Leather Grips
$90.00
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Inner Diameter: 22.2 mm - Weight: 290g per Pair
Brooks Slender Leather Grips
$90.00
For grip and control in all conditions, Brooks Slender Leather Grips feature padded leather tape for long lasting durability and great looks, perfect for straight bar bicycles. Brooks Slender Leather Grips feature vegetable tanned leather tape, a naturally timeless material for long lasting durability and great looks, perfect for straight bar bicycles. The design incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminium and steel clamps which can be removed in the event that the tape requires replacement. FEATURES: - Vegetable tanned leather tape - Aluminium shell - Aluminium and steel clamp
Chromag Format Grips
$30.00
The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.
Chromag Palmskin Grips
$31.00
Chromag's Palmskin grip is designed for riders who like a softer, supple feel and may prefer not to use gloves. The ribbed pattern is compliant under the hand while managing moisture by channeling it away into the groove.
Chromag Clutch
$39.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Cinema BMX Focus Grips
$10.99
Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin, mushroom-style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug-style bar ends. - Length: 160mm - Diameter: 30.5mm - Bar ends: Plug Style - Weight: 3.3 oz
Deda Elementi Logo Tape
$12.99
- Special microcellular structured tape material is waterproof and conforms to bar shapes - High elastic modulus provides vibration-damping and comfort - Embossed logo throughout tape length and self-adhesive backing - Black plastic end plugs and finishing strips
Deda Elementi Carbon Tape
$13.90 - $14.99
- Embossed carbon-look weave pattern and self-adhesive backing - Includes carbon look, black plastic end plugs and finishing strips
Deda Elementi Mistral Logo Tape
$16.49
- Special Micro-cellular structured tape material with perforations for breathability, comfort, and less weight - High Elastic modulus Provides vibration-damping and comfort - White printed logo throughout tape length and self-adhesive backing - Plastic end plugs and finishing strips included
Deity Components Knuckleduster
$23.99
The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set
Dimension Cruiser Grips
$7.99
Dimension Classic Cruiser Grips available in black and white. - Flange: No - Grip Shift Specific: No - Length: 140mm - Lock On: No - Shape: Round - Weight: 104g
Dimension Cork Grips
$9.99
Dimension Cork Grips are the classic style grip for cruisers or mountain bikes. - Flange: Yes - Grip Shift Specific: No - Length: 125mm - Lock On: No - Shape: Round - Weight: 26g
ENVE Handlebar Tape
$39.00
Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.
ESI Silicone Tape 10'
$8.99
Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!
ESI Racer's Edge Grips
$16.99 - $18.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Chunky Grips
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Grip XL 6.75
$29.99
Extra Chunky XL 6.75" are over 30% longer than standard grips!
ESI Grip XXL 8.25
$29.99
Extra Chunky XXL 8.25" are over 60% longer than standard grips!
ESI Fit CR Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Fit XC Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Grips Fit SG
$32.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit SG grips give you the perfect flat platform with a double step-down ledge for excellent grip while driving through corners and the perfect braking position. The open texture with micro ribs gives you supreme contact. You will want to get your hands on these! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI RCT Road Wrap
$41.99
ESI Grips NEW RCT Wrap is perfect for Road, Cyclocross, or Triathlon riders, especially riders looking for extra shock absorption and comfort compared to a normal bar tape. ESI RCT Wrap is constructed for a smooth overlay and customizable thickness. If you are looking for a thick grip, wrap it looser. If you are looking for a thinner grip, wrap it tighter. It's that easy! - 134-176 grams (Depends on how you stretch) - 3.5mm Thick - 1" Wide - 2 Rolls at 6'2" each - Custom Fit - Stretchable - Custom Density - Shock Absorbing - Comfortable - Super Tacky - No Adhesives - Long-lasting - Easy to Install Package Includes: - 2 long silicone wraps (for wrapping bar) - 2 short silicone wraps (for under hood) - 2 Silicone Tapes (adhere to themselves – 1-time use) - 1 pair of NEW custom larger Bar Plugs
Easton Pinline Bar Tape
$14.99
Easton's Pinline Bar Tape keeps your hands happy on long rides. Soft, supportive foam material delivers comfort while an adhesive backing makes sure the tape stays in place. Embossed Easton logos keep things looking classy.
Easton Microfiber Bar Tape
$29.99
Adhesive gel backing, anti-shock foam, and the soft feel of microfiber cloth will keep your hands happy on even the longest rides. Easton's Microfiber Bar Tape is cushy without deadening road feel and doesn't get slippery when wet.
Eclat Pulsar Grips
$10.99
This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI
Ergon GP2
$49.95
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
FSA PowerTouch Handlebar Tape
$31.00
- Cork tape for comfort and feel. - Fully textured surface for superior grip - Gel padding for comfort and shock absorption - Synthetic/natural cork hybrid - Gel on the inner side - 3mm thick tape - Length: 2000mm
Page 1 of 7 Next page