Lighting

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

The newest top-of-the-line Flux headlight continues the Flux tradition of optimal beam pattern, wide variety of mounting options, and super rugged construction. Compared to the Flux 1200, the Flux 1250 increases lumens and runtime, throws in the helmet and camera-style mounts, while dropping the price. BOOM! Mode Shift user interface gives you three steady modes for just the right mix of lumens and runtimes to match riding conditions. Press-and-hold to enter the secondary modes, where you will find a Steady Flash mode for increased visibility in urban conditions, a Flash mode for daytime use, and 10 and 20 hour flashlight modes for bikepacking conditions, or when you forget to recharge and need to maximize the last few percent of battery life. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - Latest CREE XP-L High Intensity LEDs combines XM-L level of output in a tighter 3.5mm package for maximum lumens with better beam pattern control. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Also includes helmet mount and action camera style mount to give you every option to blow up the night. - Premium 3400mAh Li-ion internal battery is USB rechargeable via micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 1250 lumens for 1:30 hours - Steady Medium mode: 600 lumens for 3:00 hours - Steady Low mode: 300 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 300 lumens for 4:00 hours - Daytime Flash mode: 450 lumens for 20:00 hours - Very low mode: 120 lumens for 10:00 hours - Super low mode: 60 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.

With the Stix Switch 2-Pack, your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple, long press of the power button. So, if you need extra light up front, more visibility at the rear, or a traditional front/rear combo, the Stix Switch 2-Pack delivers. - 2 to 20-hour runtime - Headlight or taillight—you decide - Fresnel lens for maximum visibility in all directions - Red/Green battery charge level indicator - Three white modes: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens) - Five red modes: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays - Additional mounting options available (sold separately)

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY The Lumina 1000 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders, and urban commuters. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Lumina Features - Lumen Output: 1000 - 6 Modes with Run Times: 1:00 – 26:00hrs - Charge Time: 2:30 / 5:00 hrs - Weight: 172g - Battery: Li-Ion - Low Battery Indicator - 1000 lumen front bike light with Boost Mode - Water / Dust Resistant IP64 Rated Run Times - Low—6:00h at 200 Lumens - Med—3:30h at 375 Lumens - High—1:30h at 750 Lumens - Boost—1:00h at 1000 Lumens - Pulse Flash—10:30h at 750 Lumens - Fast Flash—6:00h at 750 Lumens - Walk—26:00h at 50 Lumens Sabre 110 Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. LUMINA 1000 BOOST - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Lumina 1000 Boost and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1000 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator, and easy USB rechargeability, it's the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Swift Features - Lumen Output: 500 - 5 Modes with Run Times: 1:40 – 32:00hrs - Charge Time: 1:45 / 3:00hrs - Weight: 82g - Battery: Li-Po - Low Battery Indicator - 500 lumen super compact and bright taillight - Water / Dust Resistant IP64 Rated Swift Run Times - Low—10:00h at 150 Lumens - Med—3:40h at 250 Lumens - High—1:40h at 500 Lumens - Flash—12:30h at 500 Lumens - Walk—32:00h at 30 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 1:30 – 10:30hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h

Lezyne's Femto Drive Front is a compact, bright, and beautifully made light. The lens is made of high-grade optical material and serves as an activation button that cycles through four flash and one solid mode. The CNC machined aluminum body makes the Femto Drive durable and weather resistant while the back plate can be unscrewed to replace the two CR2032 batteries. The multi-position silicone rubber strap attaches the light to a wide range of handlebar diameters.

Lezyne's Femto Drive Rear is a compact, bright, and beautifully made light. The lens is made of high-grade optical material and serves as an activation button that cycles through four flash and one solid mode. The CNC machined aluminum body makes the Femto Drive durable and weather resistant while the back plate can be unscrewed to replace the two CR2032 batteries. The multi-position silicone rubber strap secures the light to a wide range of seatpost and seatstay diameters.

- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Take charge of the night! The HeadLux 100 USB features convenient cable-free charging with a direct USB port plug. Two super-bright 0.5W white LEDs provide up to 100 lumens with three light modes so you can see even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap making it simple to use and a great value. - Max Lumens: 100 Lumens - Lamp: 2 super bright 0.5 W white LEDs - Light Housing: Engineering grade polymer - Battery: 3.7V 500mAh Lithium Ion (integrated) - Control/Burn Time (approx): 3 Modes / 1.5 hr (High) / 3.3 hr (Middle) / 40 hr (Blinking) - Charging: USB port / 2 hr (approx) - Mount: Fits integrated bar/stem combo, and aero / round handlebars - Waterproof IPX 6 - Low battery indicator - Size: 6.9 x 4.3 x 2.2 cm / 2.7" x 1.7" x 0.9" - Weight: 32g / 1.13oz

Ride safe and be seen at night with the high-performance helmet light. Innovative double-sided helmet-mounted light shines white facing forward and red towards the rear, and features 4 LEDs for excellent visibility. Rubber straps provide easy installation and flexible mounting options on a helmet. - Max Luminous Intensity: 140 Lumens (Front), 10 Lumens (Rear) - Lamp: 2 white high power LED’s (Front), 2 red high power LED’s (Rear) - Battery: 3.7V 680mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 3.3hr (High), 5.5hr (Middle), 33hr (Low), 28hr (Front: Middle / Rear: Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits helmet / road bike dropbar - Waterproof: IPX 6 - Low battery indicator - Size: 6.9 x 4.4 x 2cm / 2.7” x 1.7” x 0.8” - Weight: 40g / 1.41oz

Light up the night! The PowerLux Combo includes the HeadLux 100 USB lumen front light and the TailLux 25 USB 25 lumen rear safety light. Both lights feature two super-bright LEDs and conveniently plug directly into a USB port for recharging. Quick and easy tool-free mounting with a single silicone strap. - Front Light: HeadLux 100 USB - Rear Light: TailLux 25 USB Max Lumens: Front: 100 Lumens; Rear: 25 Lumens Lamp: Front: 2 super bright 0.5W white LED's; Rear: 2 super bright red LED's Battery: Front: 3.7V 500mAh Lithium Ion (integrated); Rear: 3.7 V 320mAh Lithium Ion (integrated) Burn Time (Front): 3 Modes: 1.5 hr (High) / 3.3 hr (Middle) / 40 hr (Blinking) Burn Time (Rear): 3 Modes: 3 hr (High) / 30 hr (Low) / 40 hr (Blinking) Approximate Charge Time: USB port / 2hr Size: Front: 6.9 x 4.3 x 2.2cm / 2.7" x 1.7" x 0.9"; Rear: 6.3 x 2.7 x 2.5cm / 2.5" x 1.1" x 1" Weight: Front: 32g / 1.13oz; Rear: 30g / 1.06oz (w/ mounting clip) Waterproof: IPX 6 Mount: Front: Fits integrated bar/stem combo, and aero / round handlebars; Rear: Fits aero or round seatposts (25.4 34.9mm), seatstay, and Topeak bags

Charged to be seen! The TailLux 25 USB design features convenient cable-free charging with a direct USB port plug. Two super-bright LEDs provide 25 lumens and three light modes, so you can be seen up to 2km away—even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap, making it simple to use on seatposts, seatstays, or Topeak bags. - Max Luminous Intensity: 25 Lumens - Lamp: 2 super bright red LED's - Light Housing: Engineering grade polymer - Battery: 3.7 V 320mAh Lithium Ion (integrated) - Control/Burn Time: 3 modes / 3 hr (High) / 30 hr (Low) / 40 hr (Blinking) - Charging: USB port / 2 hr - Mounting: Fits aero or round seatposts (25.4 – 34.9mm), seatstay, and Topeak bags - Waterproof IPX 6 - Size: 6.3 x 2.7 x 2.5cm / 2.5" x 1.1" x 1" - Weight: 30g / 1.06oz (w/ mounting clip)

Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.

Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

Replacement LED assembly for the Centro LED helmet.

Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours

Our latest to-see-by headlight, the Flash 500 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 1400mAh battery pack, the Flash 500 will deliver 500 lumens for 2 hours, all the way up to 125 lumens for 8 hours. 250 lumens of Flash mode gives you a whopping 16 hours of runtime. - CREE XP-G3 LED delivers big-time lumens. - Class-leading 1400mAh rechargeable Li-ion battery pack to back up those lumens with real-world usable runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 250 lumens for 16:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 500 lumens for 2:00 hours - Steady Low mode: 125 lumens for 8:00 hours - Steady Medium mode: 250 lumens for 4:00 hours